Effect of annealing on the magnetic microstructure of high-pressure torsion iron: the relevance of higher-order contributions to the magnetic small-angle neutron scattering cross section.

The development of higher-order micromagnetic small-angle neutron scattering theory in nanocrystalline materials is still in its infancy. One key challenge remaining in this field is understanding the role played by the microstructure on the magnitude and sign of the higher-order scattering contribution recently observed in nanocrystalline materials prepared by high-pressure torsion. By combining structural and magnetic characterization techniques, namely X-ray diffraction, electron backscattered diffraction and magnetometry with magnetic small-angle neutron scattering, this work discusses the relevance of higher-order terms in the magnetic small-angle neutron scattering cross section of pure iron prepared by high-pressure torsion associated with a post-annealing process. The structural analysis confirms: (i) the preparation of ultra-fine-grained pure iron with a crystallite size below 100 nm and (ii) rapid grain growth with increasing annealing temperature. The analysis of neutron data based on the micromagnetic small-angle neutron scattering theory extended to textured ferromagnets yields uniaxial magnetic anisotropy values that are larger than the magnetocrystalline value reported for bulk iron, supporting the existence of induced magnetoelastic anisotropy in the mechanically deformed samples. Furthermore, the neutron data analysis revealed unambiguously the presence of non-negligible higher-order scattering contributions in high-pressure torsion iron. Though the sign of the higher-order contribution might be related to the amplitude of the anisotropy inhomogeneities, its magnitude appears to be clearly correlated to the changes in the microstructure (density and/or shape of the defects) induced by combining high-pressure torsion and a post-annealing treatment.

Magnetic nanoprecipitates and interfacial spin disorder in zero-field-annealed Ni50Mn45In5 Heusler alloys as seen by magnetic small-angle neutron scattering.

Shell ferromagnetism is a new functional property of certain off-stoichiometric Ni-Mn-In Heusler alloys, with a potential application in non-volatile magnetic memories and recording media. One key challenge in this field remains the determination of the structural and magnetic properties of the nanoprecipitates that are the result of an annealing-induced segregation process. Thanks to its unique mesoscopic length scale sensitivity, magnetic small-angle neutron scattering appears to be a powerful technique to disclose the microstructure of such annealing-induced nanoprecipitates. In this study, the microstructure of a zero-field-annealed off-stoichiometric Ni50Mn45In5 Heusler alloy is investigated by unpolarized magnetic small-angle neutron scattering. The neutron data analysis reveals a significant spin-misalignment scattering, which is mainly related to the formation of annealing-induced ferromagnetic nanoprecipitates in an antiferromagnetic matrix. These particles represent a source of perturbation which, due to dipolar stray fields, gives rise to canted spin moments in the surroundings of the particle-matrix interface. The presence of anticorrelations in the computed magnetic correlation function reflects the spatial perturbation of the magnetization vector around the nanoprecipitates. The magnetic field dependence of the zero crossing and the minima of the magnetic correlation function are qualitatively explained using the law of approach to ferromagnetic saturation for inhomogeneous spin states. More specifically, at remanence, the nanoprecipitates act magnetically as one superdefect with a correlation length that lies outside the experimental q range, whereas near saturation the magnetization distribution follows each individual nanoprecipitate. Analysis of the neutron data yields an estimated size of 30 nm for the spin-canted region and a value of about 75 nm for the magnetic core of the individual nanoprecipitates.

Unraveling the magnetic softness in Fe-Ni-B-based nanocrystalline material by magnetic small-angle neutron scattering.

Magnetic small-angle neutron scattering is employed to investigate the magnetic interactions in (Fe0.7Ni0.3)86B14 alloy, a HiB-NANOPERM-type soft magnetic nanocrystalline material, which exhibits an ultrafine microstructure with an average grain size below 10 nm. The neutron data reveal a significant spin-misalignment scattering which is mainly related to the jump of the longitudinal magnetization at internal particle-matrix interfaces. The field dependence of the neutron data can be well described by micromagnetic small-angle neutron scattering theory. In particular, the theory explains the 'clover-leaf-type' angular anisotropy observed in the purely magnetic neutron scattering cross section. The presented neutron data analysis also provides access to the magnetic interaction parameters, such as the exchange-stiffness constant, which plays a crucial role towards the optimization of the magnetic softness of Fe-based nanocrystalline materials.

Combining X-Ray Whole Powder Pattern Modeling, Rietveld and Pair Distribution Function Analyses as a Novel Bulk Approach to Study Interfaces in Heteronanostructures: Oxidation Front in FeO/Fe3 O4 Core/Shell Nanoparticles as a Case Study.

Understanding the microstructure in heterostructured nanoparticles is crucial to harnessing their properties. Although microscopy is ideal for this purpose, it allows for the analysis of only a few nanoparticles. Thus, there is a need for structural methods that take the whole sample into account. Here, a novel bulk-approach based on the combined analysis of synchrotron X-ray powder diffraction with whole powder pattern modeling, Rietveld and pair distribution function is presented. The microstructural temporal evolution of FeO/Fe3 O4 core/shell nanocubes is studied at different time intervals. The results indicate that a two-phase approach (FeO and Fe3 O4 ) is not sufficient to successfully fit the data and two additional interface phases (FeO and Fe3 O4 ) are needed to obtain satisfactory fits, i.e., an onion-type structure. The analysis shows that the Fe3 O4 phases grow to some extent (≈1 nm) at the expense of the FeO core. Moreover, the FeO core progressively changes its stoichiometry to accommodate more oxygen. The temporal evolution of the parameters indicates that the structure of the FeO/Fe3 O4 nanocubes is rather stable, although the exact interface structure slightly evolves with time. This approach paves the way for average studies of interfaces in different kinds of heterostructured nanoparticles, particularly in cases where spectroscopic methods have some limitations.

Phase Transformations in the CeO2-Sm2O3 System: A Multiscale Powder Diffraction Investigation.

The structure evolution in the CeO2-Sm2O3 system is revisited by combining high resolution synchrotron powder diffraction with pair distribution function (PDF) to inquire about local, mesoscopic, and average structure. The CeO2 fluorite structure undergoes two phase transformations by Sm doping, first to a cubic (C-type) and then to a monoclinic (B-type) phase. Whereas the C to B-phase separation occurs completely and on a long-range scale, no miscibility gap is detected between fluorite and C-type phases. The transformation rather occurs by growth of C-type nanodomains embedded in the fluorite matrix, without any long-range phase separation. A side effect of this mechanism is the ordering of the oxygen vacancies, which is detrimental for the application of doped ceria as an electrolyte in fuel cells. The results are discussed in the framework of other Y and Gd dopants, and the relationship between nanostructuring and the above equilibria is also investigated.

Ag2Cu3Cr2O8(OH)4: a new bidimensional silver-copper mixed-oxyhydroxide with in-plane ferromagnetic coupling.

Ag2Cu3Cr2O8(OH)4, a new Ag-Cu-Cr-O layered mixed oxide, prepared by soft hydrothermal heterogeneous reactions, is reported. The new phase is an oxyhydroxide and presents a structure with alternating brucite-like Cu-O and Ag-O layers connected by individual chromate groups. The crystallographic structure has been solved and refined from high resolution powder X-ray diffraction data and is supported by density functional theory calculations, yielding a triclinic, space group P1[combining macron], a = 5.3329(1) Å, b = 5.3871(1) Å, c = 10.0735(1) Å, α = 80.476(1)°, ß = 87.020(1)°, γ = 62.383(1)°. Bond valence sums suggest the formulation of Ag+2Cu2+3Cr6+2O8(OH)4, an electronic state fully supported by X-ray photoelectron spectroscopy (XPS) and Cr K-edge X-ray absorption near edge structure (XANES) measurements. Ag2Cu3Cr2O8(OH)4 exhibits bidimensional Cu-O-Cu ferromagnetic correlations that are apparent at much higher temperatures than in other similar Cu-O layered structures, without coupling between Cu-O layers, which represents a unique case in the recent family of silver copper oxides. The role of Ag inducing bidimensionality in copper oxides is therefore expanded further with the presence of chromate anions. Ab initio calculations using density functional theory show that the electronic states involved originate mainly from Cu and OH orbitals, with minor contributions from Cr and the O atoms linking the Cr tetrahedra to the brucitic Cu-O layer, and almost no contribution from Ag. Further modeling of the in-plane magnetic interactions between Cu atoms suggests that the coupled magnetized stripes are responsible for the observed behavior. The results are discussed in relation with previous Ag-Cu mixed oxide phases where metallic behavior or ferro-antiferro transitions had been observed. The structure of this new Ag-Cu-O phase as compared with previous silver copper oxides supports the conclusion that the Ag-Cu layered ordering is favored under oxidizing conditions.

Insights into the Local Structure of Tb-Doped KY3F10 Nanoparticles from Synchrotron X-ray Diffraction.

Pure and Tb-doped nanocrystalline KY3F10 specimens were synthesized by coprecipitation, and portions of the samples underwent further heat treatment at 600 °C in a fluorinated atmosphere. Synchrotron X-ray diffraction patterns acquired at 30 keV allowed to determine both long- and short-range ordered structures by Rietveld and pair distribution function (PDF) analyses, respectively. PDF examination of the as-synthesized sample allowed to discern a slight deviation from the basic cubic building unit because the Y-F bond lengths could be explained in S.G. I4/mmm with cell parameters a = 8.1520(9) Å and c = 11.5876(29) Å, whereas Rietveld analysis could equally well fit both the cubic and tetragonal descriptions for the heat-treated specimens. Also, PDF revealed that the as-synthesized sample exhibited less structural coherence than the heat-treated one.

Simultaneous nanocalorimetry and fast XRD measurements to study the silicide formation in Pd/a-Si bilayers.

The use of a membrane-based chip nanocalorimeter in a powder diffraction beamline is described. Simultaneous wide-angle X-ray scattering and scanning nanocalorimetric measurements are performed on a thin-film stack of palladium/amorphous silicon (Pd/a-Si) at heating rates from 0.1 to 10 K s(-1). The nanocalorimeter works under a power-compensation scheme previously developed by the authors. Kinetic and structural information of the consumed and created phases can be obtained from the combined techniques. The formation of Pd2Si produces a broad calorimetric peak that contains overlapping individual processes. It is shown that Pd consumption precedes the formation of the crystalline Pd2Si phase and that the crystallite size depends on the heating rate of the experiment.

Methane hydrate formation in confined nanospace can surpass nature.

Natural methane hydrates are believed to be the largest source of hydrocarbons on Earth. These structures are formed in specific locations such as deep-sea sediments and the permafrost based on demanding conditions of high pressure and low temperature. Here we report that, by taking advantage of the confinement effects on nanopore space, synthetic methane hydrates grow under mild conditions (3.5 MPa and 2 °C), with faster kinetics (within minutes) than nature, fully reversibly and with a nominal stoichiometry that mimics nature. The formation of the hydrate structures in nanospace and their similarity to natural hydrates is confirmed using inelastic neutron scattering experiments and synchrotron X-ray powder diffraction. These findings may be a step towards the application of a smart synthesis of methane hydrates in energy-demanding applications (for example, transportation).

A new microporous zeolitic silicoborate (ITQ-52) with interconnected small and medium pores.

A new zeolite (named as ITQ-52) having large cavities and small and medium channels has been synthesized. This was achieved by using a new family of amino-phosphonium cations as organic structure directing agents (OSDA). These cations contain P-C and P-N bonds, and therefore they lie between previously reported P-containing OSDA, such as tetraalkylphosphonium and phosphazenes. In this study, it has been found that 1,4-butanediylbis[tris(dimethylamino)]phosphonium dication is a very efficient OSDA for crystallization of several zeolites, and in some particular conditions, the new zeolite ITQ-52 was synthesized as a pure phase. The structure of ITQ-52 has been solved using high-resolution synchrotron X-ray powder diffraction data of the calcined solid. This new zeolite crystallizes in the space group I2/m, with cell parameters a = 17.511 Å, b = 17.907 Å, c = 12.367 Å, and ß = 90.22°. The topology of ITQ-52 can be described as a replication of a composite building unit with ring notation [4(3)5(4)6(1)] that gives rise to the formation of an interconnected 8R and 10R channel system.

Design and construction of multicrystal analyser detectors using Rowland circles: application to MAD26 at ALBA.

A concept is given for describing multicrystal analyser detectors (MADs), as they are in use for synchrotron powder diffraction, on the basis of the Rowland circle construction. The Rowland circle is typically used to describe focusing geometries and can be adapted for the case of MADs working at a single energy as well as in a limited energy range. With this construction it is also possible to quantify and optimize the walk of the beam along non-central crystals which is inevitable in certain detector designs. The results of this geometrical inspection are correlated with a real detector design that is implemented at the ALBA synchrotron facility in Spain. An error budget is given to estimate the influence and amount of tolerance of the manufacturing process.